BJTQL - U-1000 INTERMEDIATE CATALYST
- MSDS: BJTQL
- Manufacturer: STERLING LACQUER MFG CO INC
- Product Name: U-1000 INTERMEDIATE CATALYST
- National Stock Number: 8010-00F014124
Product Identification
Product ID:U-1000 INTERMEDIATE CATALYST
MSDS Date:02/28/1986
FSC:8010
NIIN:00F014124
MSDS Number: BJTQL
Responsible Party
ST. LOUIS, MO 63139
Emergency Phone: (314) 776-4450
Info Phone: (314) 776-4450
Cage: 5G238
Contractor
Cage: 5G238
Ingredients
HEXAMETHYLENE DIISOCYANATE *97-3*
CAS: 822-06-0
RTECS: MO1740000
Fraction By Weight: 0.21%
ACGIH TLV: 0.005 PPM
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
TOLUENE-2,4-DIISOCYANATE (TDI) (ANIMAL CARCINOGEN BY IARC -
CAS: 584-84-9
RTECS: CZ6300000
Fraction By Weight: 0.08%
OSHA PEL 0.02 PPM, CEILING
ACGIH TLV: 0.005 PPM
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
ACETIC ACID, ETHYL ESTER, ETHYL ACETATE *98-1*
CAS: 141-78-6
RTECS: AH5425000
Fraction By Weight: 15%
OSHA PEL 1400 MG/CUM
ACGIH TLV: 1400 MG/CUM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
PROPYLENEGLYCOL MONOMETHYL ETHER ACETATE,
CAS: 108-65-6
RTECS: AI8925000
Fraction By Weight: 30%
BUTYL ACETATE (N-BUTYL ACETATE) *98-1*
CAS: 123-86-4
RTECS: AF7350000
Fraction By Weight: 10%
OSHA PEL 710 MG/CUM
ACGIH TLV: 713 MG/CUM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
XYLENE, DIMETHYLBENZENE, XYLOL (IARC - GROUP 3) *98-1*
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: <5.0%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM, SKIN
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: SEVERLY IRRITATING, INJURY TO
TISSUE IF NOT PROPERLY REMOVED/SENSITIZER. SKIN: ALLERGIC REACTION.
INHALATION: IRRITATION TO THE RESPIRATORY TRACT, NOSE, THROAT &
LUNGS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES: SEVERELY IRRITATING, INJURY TO TISSUE IF
NOT PROPERLY REMOVED SENSITIZER. SKIN: ALLERGIC REACTION.
INHALATION: IRRITATION TO THE RESPIRATORY TRACT, NOSE, THROAT,
LUNGS.
Medical Cond Aggravated by Exposure:RESPIRATORY PROBLEMS
First Aid
First Aid:EYES: FLUSH W/WATER FOR 15 MINS. SKIN: WASH W/SOAP & WATER.
INHALATION: REMOVE TO FRESH AIR. INGESTION: DON'T INDUCE VOMITING.
GET MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point:28F
Lower Limits:1.1%
Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS W/FULL
FACEPIECE OPERATED IN PRESSURE-DEMAND WHEN FIGHTING FIRES. USE
WATER FOG NOZZLES TO COOL CLOSED CONTAINER.
Unusual Fire/Explosion Hazard:DON'T USE WATER. FLAMMABLE LIQUID, CAN
RELEASE VAPORS THAT FORM FLAMMABLE MIXTURES AT TEMP AT OR ABOVE THE
FLASHPOINT.
Accidental Release
Spill Release Procedures:WEAR RESPIRATOR, ABSORB W/VERMICULITE OR OTHER
ABSORBENT MATERIAL. ELIMINATE ALL IGNITION SOURCES. STOP SPILL AT
SOURCE, PREVENT SPREADING.
Handling
Handling and Storage Precautions:STORE IN DRY AREA; KEEP CONTAINERS
TIGHTLY CLOSED; PROTECT FROM PHYSICAL DAMAGE. EMPTIED CONTAINERS
RETAIN PRODUCT RESIDUES (VAPOR/LIQUID/SOLID).
Other Precautions:STORE <120F. KEEP AWAY FROM CHILDREN. FOR INDUSTRIAL
USE. BREATHING CONCENTRATED VAPORS MAY CAUSE PERMANENT HEALTH
HAZARDS. WASH W/SOAP & WATER AFTER USE BEFORE EATING OR SMOKING.
Exposure Controls
Respiratory Protection:IF TLV IS EXCEEDED, NIOSH/MSHA JOINTLY APPROVED
AIR SUPPLIED RESPIRATOR IS ADVISED IN ABSENCE OF PROPER
ENVIRONMENTAL CONTROL. ENGINEERING OR ADMINISTRATIVE CONTROLS
SHOULD BE IMPLEMENTED TO REDUCE EX POSURE.
Ventilation:PROVIDE SUFFICIENT MECHANICAL/LOCAL EXHAUST VENTILATION TO
KEEP
Eye Protection:CHEMICAL SPLASH GOGGLES, SAFETY GLASSES
Other Protective Equipment:IMPERVIOUS CLOTHING/BOOTS.
Work Hygienic Practices:WASH W/SOAP & WATER AFTER USE BEFORE EATING OR
SMOKING. REMOVE CONTAMINATED CLOTHING.
Supplemental Safety and Health
WT/GAL: 8.40 LBS. AFTER 3 TO 6 MONTHS STORAGE, THE FREE MONOMER CONTENT
MAY RISE TO 1.6% MAXIMUM. TDI/HDI MONOMER CONTENT <0.7% ON SOLIDS
AT TIME OF MFG.
Chemical Properties
Boiling Pt:B.P. Text:169-302F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:67.71%
Stability
Stability Indicator/Materials to Avoid:YES
ALKALI METAL HYDROXIDES, SUCH AS SODIUM HYDROXIDE, & STRONG OXIDIZERS.
Stability Condition to Avoid:DON'T STORE AT TEMPS >120F, IGNITION
SOURCES, HEAT
Hazardous Decomposition Products:CO2, CO, OXIDES OF NITROGEN, TRACES OF
HYDROGEN CYANIDE, HEXEMETHYL DIISOCYANATE
Disposal
Waste Disposal Methods:DESTROY BY LIQUID INCINERATION. CONTAMINATED
ABSORBENT MAY BE DEPOSITED IN A LANDFILL IN ACCORDANCE W/LOCAL,
STATE & FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.